Uniwell NX-5400 02 type

Catalogue TOP Touch Screen Middle Range Low End Discontinued Models

For Distributors HOME

TOP > Discontinued Models > NX-5400 02 type

NX-5400 02 type

Hospitality ePOS terminals
for Restaurants,Bars / Pubs, Fast-food stores

Major Features

		Clerk Interrupt System

When the clerk interrupt system is selected, even if a clerk is in a middle of registrations, another clerk may interrupt the clerk. The interrupted clerk's registration contents are stored in his/her clerk's memory and the clerk is automatically signed off. The stored contents are restored by his/her clerk sign-on operation and he/she can continue the registrations.

		Simple Track System - Item Track or Amount Track (max. 30 tracks)

Under Item Track System, details of registered contents in each bill can be recorded in ECR memory, and each bill can be identified by its assigned bill or track number. You can open and temporarily closed it as many times as you want, using "New Balance" key, until you close the bill finally with a media key. Amount Track System records only total amount of money traded in each registration transaction.
* note: Clerk Interrupt System is not compatible with Simple Track System. Only one of these can be selected.

		Transaction Void

"Transaction Void" allows you to cancel an entire transaction - even after many registrations - at instant. You do not need to cancel many registrations one by one.

		ESF memory

You can save, in ESF memory, data of all the registrations/operations done in "R" mode.

		Simple Condiment PLU

The Simple Condiment PLUs can be printed in red or in black with vertically double-sized characters on kitchen printer. This will help cooks/kitchen staff to recognize which ones are single dishes.

		Tray Subtotal

This feature will be useful at where, like cafeterias, each one in a group buys some items individually, and somebody in the group pays total amount.

Hardware Specifications of NX-5400-02

Printer		Epson M-U420 impact dot matrix without an auto cutter Print width: 24 columns/line, 55 columns for validation Print speed: 3.0 lines/sec Fine quality paper roll, 44.5 x Φ83 mm Validation paper: 135 to 210 mm (width), min. 70 mm (height), 0.07 to 0.14 mm (thickness)
Display (7segment LED)		Front: 1-line 12 digits numeric Rear: 1-line 12 digits numeric (standard)
Keyboard		Stroke key: 58 key positions Flat key: 128 key positions
System Power		DC 24V/2A external power adapter
AC Power Source		AC 100 to 240V, 50/60Hz
Temperature		Operation: 0° ~ 40° C (32° ~ 104° F) Storage: -10° ~ 50° C (14° ~ 122° F)
Dimensions		405 (W) x 423 (D) x 285 (H) mm with drawer
Weight		Approx. 12 Kg with drawer
Memory Protection		3 months
RAM Capacity (for details)		Standard: One 4M bit RAM chip on MPU board Option: One RAM board is available.
Interface (See System Configuration below.)		ch-A: RS485 ch-B: RS232C

System Configuration of NX-5400-02

Max. 8 units of ECR can be connected on the IRC line.
Max. 4 kitchen printers and 4 slip printers are also available on the IRC line.